Pumps and controllers

The circulating pump RP is the most commonly used pump between this type of pump.

These models are completely dipped and suitable for many applications. RP circulators are very reliable. They meet international standards and, due to their compact size, are easy to install, even in smaller spaces.

The circulators are 13 mm and 20 mm hose connections and are connected to a variable flow regulator.

RP circulators are easy to maintain and come with a 1.5 m cable.

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or biofilters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 48W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 1800 l/h
• Max Hight: 2.30 m

Gravity feed and main pressure irrigation controller

The PLANT!T® Water Timer can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir. Simply select the time you want the water supply to be turned on and off, link up to your irrigation dripper line and the timer will do the rest.

Air compressor with ribbed housing for better heat distribution. Compact size and minimal power consumption.

Features:

• Flow rate: 20L/min, 1200L/h
• Pressure: >0.015Mpa
• Power: 18W
• Input voltage: 220-240V 50Hz
• Outlet diameter: 6mm
• Noise: <55dB

The circulating pump RP is the most commonly used pump between this type of pump.

These models are completely dipped and suitable for many applications. RP circulators are very reliable. They meet international standards and, due to their compact size, are easy to install, even in smaller spaces.

The circulators are 13 mm and 20 mm hose connections and are connected to a variable flow regulator.

RP circulators are easy to maintain and come with a 1.5 m cable.

Wave Maker 6000 - stirring pump 12W 6000 l./h.

The Wave Maker 6000 is a pump designed to stir the nutrient solution in the tank. It protects the water in the tank from stagnation and therefore the loss of oxygen. The more water circulates, the more it will be enriched with oxygen. The device has a hinged ball joint that allows it to rotate 360°.

• Power: 12W
• Capacity: 6000 l./h.
• Double wave device
• Equipped with a high quality suction syringe for easy attachment

Produces an air flow of up to 3.2 l/min.

The pump is a perfect solution for oxygenating your tank, aqua farm, or hydroponic system.

Features:

• Flow rate: 1.5L/min
• Pressure: >0.012Mpa
• Power: 2.5W
• Input voltage: 220-240V 50Hz
• Outlet diameter: 4mm
• Noise: <40dB

Wave Maker 3000 - stirring pump 6W 3000 l./h.

The Wave Maker 3000 is a pump designed to stir the nutrient solution in the tank. It protects the water in the tank from stagnation and therefore the loss of oxygen. The more water circulates, the more it will be enriched with oxygen. The device has a hinged ball joint that allows it to rotate 360°.

• Power: 6W
• Capacity: 3000 l./h.
• Double wave unit with a maximum capacity of 12,000 liters per hour
• Equipped with a high-quality suction syringe for easy attachment

Produces an air flow of up to 3.8 l/min.

The pump is a perfect solution for oxygenating your tank, aqua farm, or hydroponic system.

Features:

• Flow rate: 3.8L/min
• Pressure: >0.012Mpa
• Power: 2.5W
• Input voltage: 220-240V 50Hz
• Outlet diameter: 4mm
• Noise: <40dB

It is made of high-quality plastic materials in a closed structure, whose engine is completely waterproof and oil-cooled, which has a filter inside to avoid obstacles in the working mechanism.
It consists of a thermostat that stops the engine in case of overheating. You should always immerse it in the water for proper use and never more than 2 meters a. You should not work with it at temperatures above 35º.
Depending on the flow or the dimensions of the hose we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you want to use an irrigation pipe, at least 2000l / h is recommended for a small flow of water, at 3000l / h you will get normal pressure and at 4000l / h you will get ideal pressure. If you are going to use the pump for drip irrigation, a minimum of 1000 l/h is recommended for each square meter of crop.