Ballasts

Digital 600W Digital Ballast

New economic ballast, slim and compact.Made of quality materials, with built-in dynamometer, Watt regulator.HPS and MH lamps can work with this oneIt is silent and thanks to its construction material, it is not heated.

With a 600-watt light bulb, you can operate the transformer on 4 modes, 250W, 400W, 600W, and 600W Super Lumens, delivering 10% extra light from the magnetic transformers.

Ballast With a Rated Power of 400 W. Appropriate for High-Pressure Sodium and Metal Halide bulbs.

Quality Lighting Ballast

This ballast allows the stabilization of the current supplied in output at the same time guarantees greater stability of the luminous flux and consequently a greater duration of the lamps. Closed body for further isolation and safety, It is wired easily thanks to the screw terminals on the front.

Suitable for the lighting of bulbs HPS and MH 400W.

• Power: 400w
• Works with both HPS and MH lamps
• Voltage: 220-240V/50Hz
• Easily mountable
• Long strike distance to the lamp up to 15m
• Thermal cutouts to protect against short circuits
• Pre-wired input and output cable
• CE certified
• Fuse: Yes
• 18 Months Warranty

Electromagnetic start-regulating device for sodium and metal halide lamps

This ballast allows the stabilization of the current supplied to the output while guaranteeing a greater stability of the light flow and therefore a longer duration of the lamps. Closed body type for further insulation and safety.

Suitable for lighting HPS and MH 600W bulbs.

• Power of 600w or more
• Works with both HPS and MH lamps
• Easy to install
• Long distance to connect to the lamp, up to 15m
• Thermal switches for short circuit protection
• Pre-wired input and power cable
• CE certified

Lumii Black 600w Digital Ballast 250w-660w

This 600w Electronic Ballast is supplied as a stand-alone ballast with a flying IEC lead so you can add any reflector fitted with an IEC socket to start growing. The ballast features both dim and boost functions, having the ability to control the light output from the lamp.

​​​​​​​The ballast features both dim and boost functions, having the ability to control the light output from the lamp. There are two dimmable options (250w & 400w) and a ‘super-lumens’ boost option (600w+Boost) which is on average an extra 10% increase in output. 
For best results, always use the correct lamp per wattage setting

Specifications:

• Wattage    600w
• Core    N/A
• Technology    Electronic
• Ignition    N/A
• Case    Metal
• Power Lead    2m
• Voltage    240v
• PF    0.98
• Running Amps    2.9 amps

The compаct two in one Lumatek Twin 600W 240V Dimmable Electronic Bаllast can run one or two 600W and/or 400W horticultural HPS / MH bulbs at the same time. You can controle the two bulbs separately. 

The options per bulb are on/off, dimmable (300w, 400w, 600w), and Super Lumen Boost 660w.

Specifications:
Case: Graduated Fin Aluminium;
Dimming Range (W): 360W – 400W - 600W - 600SL (Super Lumen boost to 660W);
Mains Supply Voltage: 240V 50/60Hz;
Input Current(A): 3.0 (x 2);
Input Power (W): 380 – 424 – 635 - 695 (x2);
Output Power (W): 360 – 400 – 600 – 660 (x 2);
Operating Frequency (KHz): < 90;
Power Factor: 0.99;
Efficiency(%): 95;
Mains Voltage Range (V): 175 - 275;
Temperature: capable of operating at full load in ambient temp -25°C to 40°C;
Humidity: capable of operating in relative humidity of 0% to 90%.

The Lumatek E-Ballast is a high performance product that is designed to work with most high quality lamps.

Cheap inferior lamps may cause problems and Lumatek recommends using only high quality lamps from reputable manufacturers. For best results; always pair your Lumatek ballast with a Lumatek horticultural HID grow lamp.

Lumаtek digital ballasts аre the most advanced lighting solution for modern horticulture.

Small, compact, and completely silent these E-Ballasts are able to deliver more lumens while using less electricity than standard magnetic ballasts.
Unlike traditional 'core and coil' magnetic bаllasts, Lumateks are microprocessor-controlled and аble to evaluate and compensate for the actual state of lamp degradation and voltage fluctuations in power supply from your local grid. This means that Lumateks are able to provide a precise controlled output voltage to the lamp ensuring optimum PAR levels are achieved.

Electronic ballast for 1000w, 750w or 600w HPS lamp or 1000w or 600w MH lamp

To light a 600W lamp; set control to 600W.
To light a 750W lamp; set control to 750W and dim down to 600W.
To light a 1000W lamp; set control to 1000W and boost output by 10% by switching to 'Super Lumens' or dim down to 750W or 600W.

Voltage: 220-240V 50/60Hz
Current: 4.70A
Input power: 1030W
Output power: 1000W
Power factor: >0.99
Voltage range: 175 to 275V
Operating frequency: high frequency
No audible noise, no flicker
Envirement temperature for full load operation: -25 to 40°C (-13 to 104°F)
Ta 30°C 86°F
Tc 70°C 158°F
Humidity: capable of operating in relative humidity of 0% to 90%, non-condensing

The GSE electronic bаllast can manage all kind of MH metal-halide and HPS high pressure sodium bulbs at 250-400-600W.

GSE uses only finest high quality components such as aluminium casted long live and high temperature electrolytic capacitor, transistors PhilipsNXP, high frequency ISKRA components etc... and source >84% EU manufactured components. A extremely big-surface aluminium radiator keeps the running temperature low and provides a long life of the components. The high frequecy above 80kHz to 220kHz avoids acustic resonance of the bulb.

The ballast comes as a finish assembled product with 3m connector cаble and 4m lamp cable to connect to the reflector E40. It is all waterproof sealed and have IP64 protection class.

Features: 

• Starts 250W, 400W, 600W, HPS and MH lamps 
• Overdrive +10% output power 
• Soft start technology low current 
• Hot lamp protection 
• Infinitely variable control 
• Cool down dimming protection 
• High efficiency >0.96 
• LED status light diagnostic 
• Stand by mode IP64 water proof 

The DIM-BAL 600W is an electronic ballast with 4 adjustable operating positions (300, 450, 600 and 660W), which аllows us to regulate the energy consumption of the system аdapting to the stage of plаnt growth, and can improve performance with respect to energy used.

• Supply voltage: 230V
• Power Consumption 600W: 64SW
• Input current 600W: 2.Bl A
• Power Consumption 660W: 705W
• Input current 660W: 3.07A
• Power factor: ≥ 0.99
• THD: ≤ IO%
• Input frequency: 50 / 60Hz
• TC (box): 80 ° C
• Ta (ambient): -30 - S0 ° C

CE approved

Digital ballast 600 W

Economical, slim and compact! Made of quality materials with integrated dynamometer and power regulator. Can work with HPS and MH lamps. He is quiet and thanks to the material from which he is made, he does not heat up. With a 600-watt bulb, you can control the transformer in 4 modes: 250W, 400W, 600W and 600W Super Lumens, providing 10% extra light in more than the magnetic chokes.

Technical data:

• Inch. voltage: 230V / 240V
• Frequency: 50Hz / 60Hz
• Imax: 3.00A
• PF> 0.99
• THD <10%
• CF <1.7
• Operating temperature: -30 to +40 degrees Celsius